wXa-203, wXa-213, wXa-223
Optimizer
v2.2.1
8.2. Profiles
Profiles is designed for users of multiple satellite devices and integrators of custom
installations. You can configure the Optimizer for a specific satellite device and save the
profile. This is good for failover situations when using multiple devices. An extreme
example would be that you might have the firewall wide open on a VSAT device but in
an emergency must use an Iridium handheld device where you want the full protection
of the Optimizer firewall. Have a profile for each configuration and select the appropriate
one for the satellite device being used.
To access Profile Manager, go to System > Profiles.
There are three default profiles:
ATA: This profile is used to make the Optimizer into an Analog Telephone Adapter when
linking an Analog Telephone through Wi-Fi Ethernet Networking Bridge and repeats the
satellite terminal's SSID. This profile would be installed automatically as needed when
the Optimizer is plugged into a satellite terminal.
Factory: This profile will reset the Optimizer to factory defaults and all custom
configurations will be lost.
52