Table of Contents
Advertisement
wXa-203, wXa-213, wXa-223
Optimizer
v2.2.1
Each service is contained in its own tab under the Services section. This is where you
will enable/disable the services and configure them for use.
Status: displays how much memory the router is using, who is connected via Wi-Fi and
other information you may find useful.
The System Log contains detailed information of the router's performance. It will report
error messages and can be useful when troubleshooting connection issues. Realtime
Graphs report how much data is being using by the different interfaces. All Status
information is Read Only.
System: contains some of the router's basic settings for you to configure plus a few
maintenance functions.
Use this section to set your time zone, change the 'admin' and/or 'superadmin'
password, flash new firmware to the router, reboot the router if necessary. Profiles is a
way to 'clone' the router configuration for use on another Optimizer router.
Network: contains access to the network interfaces and the firewall.
Use this section to configure network interfaces, run diagnostics, or modify the firewall.
Statistics: contains information about resource usage.
Use the tabs to navigate through the user interface. You will see that the information
represented in the user interface can be quite technical. This Guide will cover only those
sections of the user interface that require configuration for a specific service or may need
to be accessed by the average user.
15
Advertisement
Table of Contents
