RedPort Optimizer WXA-223 Advanced User's Manual page 36

wXa-203, wXa-213, wXa-223 Optimizer v2.2.1
Notice the signal strength is 0% as you are not yet connected to the wireless network.
Click <Save & Apply> to tell the Halo to connect to that network.
Notice that now the signal strength now registers greater than 0%.
NOTE: If the signal status is blinking from 0% to 100% this typically means that the Wi-
Fi Network Password/Key was entered incorrectly. Check with the external Wi-Fi
Network Administrator to confirm the correct password. Click the Wireless Security tab
and enter the correct password in the Key field and <Save & Apply>.
5. Click the <Home> Tab to return to the Welcome screen.
35