Panasonic NA-16VX1 Service Manual page 36

NA-16VX1/16VG1/14VA1
Description
24 Replacement
of the Motor
25 Replacement
of the Pulley
All manuals and user guides at all-guides.com
Figure
3.Turn the large pulley and remove the belt outward.
After remove the rear panel lay down the washing
machine on it left side and remove the hole cover,
1.Remove the insulation cover .
2.remove the connector.
3.Remove the two bolts mounting the motor by the
4.Pull out the motor.
After remove the rear panel
1.Insert the two holes of the pulley with special tool
2.Remove the belt.
3.Remove the nut and gasket.
4.remove the pulley.
-36-
Procedure
box wrench (size 10mm).
(Parts No . JF066), then loosen the nut with spanner
as shown in left figure .