NA-16VX1/16VG1/14VA1
Description
6 Replacement of
the PC Board for
operation
All manuals and user guides at all-guides.com
Figure
4.pull all pawls up to remove the detergent case A
5.Remove the two screws mounting the feed valve
6.Remove the three connectors from the feed valve
After remove the upper board,
1.Remove the detergent case B, and remove the
2.Remove another screw mounting the panel face
3.Insert the metallic ruler between the panel face
4.Pull out the panel face board to remove.
Note:
Please roll the tape at tip of the tool to prevent
scratch on the surface of the panel face board.
-28-
Procedure
from the body joint.
unit as shown in left figure.
unit, and pull it out to remove by a screwdriver.
one screw mounting the panel face board.
board.
board and the body B to remove the two pawls.