Rotel RDV-985 Technical Manual page 4

(4)Flap adjustment of the Pick-up guide shaft
Attention !!
RDV-985 is adjusted from issue machine because of the FL display on the way.
Please go in the adjustment method before changes according to the following procedures.
Measurement
CN104 pin"1"
GND:CN104 pin"2"
Measurement machine
Oscilloscope
General tool : Hex-head wrench(2mm)
All manuals and user guides at all-guides.com
Mode
Adjustment point
Reproduction
Refer to Fig.2
part
Extension cord No.
connections
QUQ110-3740AM
Refer to Fig.1
Disc
VT-502
CN101 of DVD Servo Control PWB
Extension Cord
DVD Mechanism A'ssy
CN11 of
Connection PWB
Stand
Fig.1
RDV-985
200mm
Stand