Information Of Peer Device - HIKVISION DS-3WF0AC-2NT User Manual

Items
Wireless
Parameters
Network
Parameters
3.2

Information of peer device

Log in to the web UI, and choose Status > Peer Device.
You can view the transmitted and received rate of this wireless bridge, and view the related
information of peer device, such as signal strength, noise, IP address and MAC address.
DS-3WF0AC-2NT User Guide
Operating Mode
SSID
Security Mode
Network Mode
Channel Width
Channel
Transmission Power
IP Address
Subnet Mask
Gateway
DNS1
DNS2
Description
It specifies the working mode the device operates. The wireless
bridge works in AP mode or CPE mode, and cannot be changed.
It specifies the wireless network name of this device.
It specifies the security mode of the wireless network of this
device.
It specifies the network mode of this device.
It specifies the bandwidth of the operating channel of a
wireless network.
It specifies channel in which this device operates, and its center
frequency.
It specifies the transmit power of this device.
Higher number indicates wider WiFi coverage. Setting a proper
transmit power helps improve the performance and security of
the wireless network.
It specifies the IP address (also named management IP address)
of this device. You can change this IP address on the Network
page.
It specifies the subnet mask of the wireless bridge.
It specifies the default gateway of the wireless bridge. When
the device accessing the internet, packets should be forwarded
through the gateway.
It specifies the primary DNS server IP address of the wireless
bridge.
It specifies the secondary DNS server IP address of the wireless
bridge.
9