How To Configure Line - Siemens BC8001A Installation And Operating Instruction

12.3

How to configure line

1~5 steps is the same as "how to configure station".
6. Press "↓" to choose "1.Lines" and press "OK" key.
All lines are displayed. Press "↓" / "↑" to scrow down/up.
7. Press "↓" to choose one desired line and press "OK" key.
8. Press "↓" to choose "1.Line Property" and press "OK" key.
The property of the selected line is displayed. The text, operability can be modified.
Press "↓" / "↑" to switch active window.
9. Press "OK" to save the modification and return to the previous window.
Note:
1. Now the modified text is saved temporarily. If the control unit is reset, the modified text
will be lost. If you want to save the modification for long time, please do the "Save
Configuration" operation(refer to Page 44).
2. The function of operability is reserved.
BC8001A Installation and Operating Instruction
<Configure Station> L 3 A
1. Lines
2. Station Property
<Config Line> L 3 A
001 IOs
002 Ports
003 BDS Line 004
004 Powers
<Config Line> L 3 A
1. Points
2. Line Property
<Config Line004> L 3 A
Address 02.004.000
Type BDS Line
BDS Line 004
Text
Status Normal
<Config Line004> L 3 A
Mode Normal
Operability
Yes
Page 33/49