Turn The Power On - Canon PIXMA MX870 Series Getting Started

3
D
Use the { or } button (C) on the Operation Panel
to select the language for the LCD (Liquid Crystal
Display) (D), then press the OK button.
• If an unintended language is displayed on the LCD, press the Back button (E) to
return to the Language selection screen.


3 Turn the Power On

4
C
E
Make sure that the
above screen is
displayed and go to the
next step.
□ Turning the power off
Be sure to follow the procedure below.
1. Press the ON button (A) to turn off the machine.
2. Make sure that all the lamps on the Operation Panel
are not lit.
1 A 2
Operating noise may continue for up to 30 seconds until the
machine turns off.
• When removing the power plug, make sure that all the
lamps on the Operation Panel are not lit before removing
the plug. Removing the power plug while all the lamps on
the Operation Panel light up or flash may cause drying and
clogging of the Print Head, resulting in poor printing.
If your machine is used as fax
• Removing the power plug deletes all faxes stored
in memory. Send or print faxes as necessary before
removing the power plug.