AEG LF9C1612AQ User Manual page 38

38 www.aeg.com
In this case, for 30 seconds, it is possible
to pause the appliance and remove the
exceeding garments.
Once removed the exceeding garments,
touch the Start/Pause button to start the
program again. The ProSense phase can
be repeated up to three times (see point
1).
Important! If the laundry amount will not
be reduced, the washing program starts
anyway, despite the overload. In this
case, it will be not possible to guarantee
the best washing results.
About 20 minutes after the
program start, the program
duration could be adjusted
again depending on the
capacity of water absorption
of the fabrics.
The ProSense detection is
carried out with complete
washing programs only (no
skipping phase selected).
The ProSense is not
available with some
programs, such as Wool/
Silk, Rinse, Spin and
programs with short cycles.
12.8 Program phase
indicators
When the program starts the indicator of
the running phase flashes and the other
phase indicators are steady on.
E.g. the washing or pre wash phase is
running:
When the phase ends the relevant
indicator stops flashing and is steady on.
The next phase indicator starts flashing.
E.g. the rinse phase is running:
If you select the Steam Plus the steam
phase indicators come on.
The steam phase is running:
.
.
The anti-crease phase is running:
.
12.9 Interrupting a program
and changing the options
When the program is running, you can
change only some options:
1. Touch the Start/Pause button.
related indicator flashes.
2. Change the options. The given
information in the display changes
accordingly.
3. Touch the Start/Pause button again.
The washing program continues.
12.10 Cancelling a running
program
1. Press the On/Off button to cancel the
program and to deactivate the
appliance.
2. Press the On/Off button again to
activate the appliance.
Now, you can set a new washing
program.
If the ProSense phase is
already carried out and the
water filling is already
started, the new program
starts without repeating the
ProSense phase. The water
and the detergent are not
drained out in order to avoid
waste. The display shows
the maximum duration of the
program, updating it about 20
minutes after the starting of
the new program.
12.11 Opening the door -
Adding garments
.
While a program or the delay start
operates, the appliance door is locked.
The