Table of Contents
Advertisement
Every time you switch the
appliance on, the appliance
takes about 10 seconds to
connect to the network
automatically. When the
indicator
the connection is ready.
To switch the wireless connection off,
press and hold the Detergent
the Softener
buttons for a few
seconds simultaneously until the first
acoustic signal. Release the buttons.
appears on the display for 5
seconds.
If you switch the appliance
off and on again, the
wireless connection is
automatically off.
To remove the wireless credentials,
make sure that the Wi-Fi connection is
on. Press and hold the Detergent
and the Softener
10 seconds simultaneously until the
second acoustic signal:
the display.
11.3
Remote Start
The Remote Start enables you to start a
cycle in remote control.
The Remote Control
activates automatically when
you press the Start/Pause
button to start the program,
but it is also possible to start
a washing program remotely.
This function is deactivates
when door is open.
stops blinking
and
buttons for at least
appears on
When the App is installed and the
wireless connection is complete, you can
activate the Remote Start:
1. Touch the Remote
indicator
blinks on the display
for a few seconds.
2. Touch the Start/Pause button to
activate the Remote Start before the
indicator
stops blinking.
The indicators
and
program summary screen and the door
is locked. Now it is possible to start the
program remotely.
When touching the Start/
Pause button after the
indicator
blinking, the Remote Start is
not activated, but the set
program starts.
To remove the Remote Start, tap on the
Remote
button and confirm by
pressing the Start/Pause button.
11.4 Over-the-air update
The App may propose an update for your
appliance.
The update is accepted via App only.
If a program is running, the App notifies
that the update will start at the end of the
program.
During the update, the appliance shows
in the display.
Do not switch off or unplug the appliance
during update.
The appliance will usable again at the
end of the update, without any
notification about successful update.
If an error occurs, the appliance shows
in the display: just press any
ENGLISH
35
button and the
appear on the
stops
Advertisement
Table of Contents
