Taking Pictures While Adjusting a Setting
Automatically
Recording mode:
You can take multiple pictures while automatically adjusting a setting by pressing
the shutter button.
1
Set the menu (→23)
→
(Exposure Bracket)
(White Balance Bracket)
2
Press
to select [More settings] and then press
[MENU/SET]
• If [
] is set, rotate the rear dial to set the adjustment range.
• Press the shutter button halfway to exit the menu.
3
Focus on the subject and take a picture
■
To cancel [Bracket]
Select [OFF] in step
Exposure Bracket
■
About [More settings] (step
[Step]
[Sequence]
[Single Shot Setting]
Not available for burst recording.
(Bracket Recording)
[Rec] → [Bracket] → [Bracket Type]
Press the shutter button to perform recording while
adjusting the exposure.
Press the shutter button once to take three pictures with
different white balance settings automatically.
1
.
Sets the number of pictures to be taken and the exposure
compensation range.
Sets the order in which pictures are taken.
[
]: Takes one picture each time you press the shutter button.
[
]: Takes all the pictures set to be taken when you press the
shutter button once.
2
above)
Recording
DVQX1158 (ENG)
33