Adjusting The Focus After Recording ([Post Focus] / [Focus Stacking]) - Panasonic Lumix DC-FZ80 Basic Operating Instructions Manual

Recording
Adjusting the focus after recording
([Post Focus] / [Focus Stacking])
Recording mode:
You can record 4K burst pictures while changing the focus point and then select a
focus point after recording. This function is best for non-moving subjects.
You can select multiple focus points and combine them into one picture. ([Focus
Stacking])
• We recommend using a tripod to perform [Focus Stacking].
• To record pictures, use a UHS Speed Class 3 card.
• During recording, the angle of view will be narrower.
1
Press [
2
Press
3
Determine the composition and
press the shutter button halfway
• Auto Focus activates and automatically detects
the focus point on the screen.
• If there is no focus point on the screen, the Focus indicator ( ) blinks and
you cannot record.
From halfway pressing the shutter button to completion of recording
• Do not change the distance to subject or the composition.
4
Press the shutter button fully to start
recording
• The focus point changes automatically while
recording. When the recording progress bar ( )
disappears, recording automatically ends.
• A motion picture will be recorded in MP4 format. (No audio is recorded.)
• If Auto Review is set, a screen will automatically appear that lets you select
the focus point. (→31)
■
Cancelling [Post Focus]
Select [OFF] in step
●
If the surrounding temperature is high or [Post Focus] recording is performed
continuously, [
through. Wait until the camera cools down.
30
DVQX1158 (ENG)
] button
to select [ON] and press [MENU/SET]
2
.
] may be displayed and recording may be stopped halfway