Installation; Maintenance - DeLonghi HVY1030 Instructions Manual

ELECTRICAL CONNECTION
- BEFORE PLUGGING INTO THE MAINS, MAKE SURE THE VOLTAGE OF YOUR MAINS SUPPLY CORRESPONDS TO THE VALUE
IN VOLTS (V) INDICATED ON THE APPLIANCE AND THAT THE SOCKET AND POWER LINE ARE APPROPRIATE FOR THE LOAD
REQUIRED.
- THIS APPLIANCE COMPLIES WITH DIRECTIVE 2004/108/EC ON ELECTROMAGNETIC COMPATIBILITY.

INSTALLATION

The appliance must be used in the portable configuration only. The appliance is designed and produced for domestic use
only.
- If the appliance is used in a room with bath or shower, respect the "safety distances" shown in fig. 1 and always
install away from taps, basins, showers, etc. The appliance must not be placed immediately under a fixed power
socket.
FUNCTIONING AND USE
MODELS WITH FUNCTION SELECTOR AND THERMOSTAT
Make sure the appliance is off before plugging into the mains.
1. Plug the appliance into the mains.
2. Turn the thermostat dial
3. Summer mode (fan only): turn the function selector
4. Low power operation: turn the function selector
5. Medium power operation: turn the function selector
6. High power operation: turn the function selector
7. Switching off: turn the function selector
then unplug from the mains socket.
NB: In models with two power levels only, position 2 corresponds to maximum power.
Setting the thermostat:
Position the thermostat
1
slowly anticlockwise until you hear a click (the fan and the light go off). The thermostat will then keep room tempe-
1
rature at the selected level automatically.
2
1
Frost prevention mode
With the function selector
in position , the appliance maintains room temperature at about 5°C, preventing freezing with minimal energy con-
sumption.
MODELS WITH THERMOSTAT ONLY
To switch the appliance on, turn the thermostat dial
To switch the appliance off completely, turn the knob to the
For the frost prevention function, turn the thermostat dial
mains.

MAINTENANCE

- Always unplug from the mains socket before cleaning.
- Clean the air intake and outlet grilles regularly.
- Do not use abrasive products or solvents to clean the appliance.
1
to maximum.
1
1
2
1
1
1
to the "0" position and the thermostat dial
2
on maximum. When the room has reached the required temperature, turn the thermostat dial
2
in position 3 (position 2 for models with two power levels only) and the thermostat dial
2
2 to the position (the light comes on).
to position 1.
2
to position 2.
2
to position 3.
2
1 clockwise to maximum (the light comes on).
position, then unplug from the mains.
2
to the position and leave the appliance plugged into the
1
2
to the position,
1
2
1
9
2