Choosing An Installation Site; Indoor Unit; Wireless Remote Controller - Daikin ATX20J2V1B Installation Manual

Hide thumbs Also See for ATX20J2V1B:
Table of Contents

Advertisement

Accessories
,

Indoor unit

A
L
Mounting plate
A
Titanium Apatite
B
Photocatalytic
Air-Purifying Filter

Wireless remote controller

D

Choosing an Installation Site

• Before choosing the installation site, obtain user approval.
1.
Indoor unit.
• The indoor unit should be sited in a place where:
1) the restrictions on installation specified in the indoor unit installation drawings are met,
2) both air intake and exhaust have clear paths met,
3) the unit is not in the path of direct sunlight,
4) the unit is away from the source of heat or steam,
5) there is no source of machine oil vapour (this may shorten indoor unit life),
6) cool (warm) air is circulated throughout the room,
7) the unit is away from electronic ignition type fluorescent lamps (inverter or rapid start type) as they may shorten the
remote control range,
8) the unit is at least 1 metre away from any television or radio set (unit may cause interference with the picture or sound),
9) install at the recommended height (1.8m).
2.
Wireless remote controller.
1) Turn on all the fluorescent lamps in the room, if any, and find the site where remote control signals are properly received
by the indoor unit (within 7 metres).
English
1
Remote controller holder
E
2
AAA dry-cell batteries
G
Indoor unit fixing screws
H
1
(M4 × 12L)
1
Operation manual
K
2
Installation manual
L
2
1
1
2

Advertisement

Table of Contents
loading

This manual is also suitable for:

Atx25j2v1bAtx35j2v1bAtx20j3v1bAtx25j3v1bAtx35j3v1b

Table of Contents