Advertisement
Quick Links
1
Shipping package
Thanks for buying ICPDAS DL-10 module. This shipping package contains the following
items:
2
Appearance & Pin Assignment
Front View
Temperature and
Humidity Sensor
Copyright © 2017 ICP DAS Co., Ltd.
DL-10
DL-10 module x 1
Power and RS-485 Connector
CONN
1
2
3
4
DL-10 Quick Start, version 1.0
Quick Start x 1
Pin
COLOR
Assignment
White
D-
Red
Vcc
Black
GND
Green
D+
Last Revised: Jun. 2017
All Rights Reserved.
Quick Start
Version 1.0 Jun. 2017
Rear View
- 1 -
E-mail: service@icpdas.com
Init Switch
Advertisement
Related Manuals for ICP DAS USA DL-10
Summary of Contents for ICP DAS USA DL-10
- Page 1 DL-10 Quick Start Version 1.0 Jun. 2017 Shipping package Thanks for buying ICPDAS DL-10 module. This shipping package contains the following items: DL-10 module x 1 Quick Start x 1 Appearance & Pin Assignment Front View Rear View Power and RS-485 Connector...
- Page 2 Prepare for device RS-232 to RS-485 Converter: tM-7520U (optional) Exterior power supply device: MDR-20-24 (optional) Wiring CA-0915 Cable Connect both the DL-10 module and the Host PC via the tM-7520U. Power Supply +10 ~ +30 V (e.g., MDR-20-24) ...
- Page 3 COM port that connects to DL-10. 3. Select the 115200 and 9600 in the Baud Rate option. DL-10 Quick Start, version 1.0 Last Revised: Jun. 2017 - 3 - Copyright © 2017 ICP DAS Co., Ltd. All Rights Reserved. E-mail: service@icpdas.com...
-
Page 4: Related Information
Protocol option. 5. Click OK button. 6. Click the Start Search button to search DL-10 module. 7. The DL-10 module will be displayed in list and click the Stop Search button. Related Information DL-10 Product Page: http://www.icpdas.com/root/product/solutions/remote_io/rs-485/dl_series/dl-100t485.html... - Page 5 前視圖 後視圖 電源及 RS-485 接頭 Init 開關 CONN 顏色 腳位 溫濕度感應器 白色 紅色 黑色 綠色 DL-10 Quick Start, version 1.0 Last Revised: Jun. 2017 - 5 - Copyright © 2017 ICP DAS Co., Ltd. All Rights Reserved. E-mail: service@icpdas.com...
- Page 6 連接電源與電腦主機 準備項目 RS-232 連 RS-485 轉換器: tM-7520U (選購品) 外部電源供應器: MDR-20-24 (選購品) 接線方式 CA-0915 Cable 將 DL-10 模組透過 tM-7520U 轉換 器連接至電腦主機 電源供應器 +10 - +30 V (如:MDR-20-24) Vcc 接至電源供應器正端(10 - 30 V )，GND 接至電源供應器負端 DL-10 Quick Start, version 1.0 Last Revised: Jun.
- Page 7 to “Comport Option” 配置 對話框 2. 選擇 COM Port (如: COM9)，此 COM Port 為您 PC 所連接至 DL-10 的 COM Port 3. 在 Baud Rate 配置區， 勾選 115200 及 9600 DL-10 Quick Start, version 1.0 Last Revised: Jun. 2017 - 7 - Copyright ©...
- Page 8 4. 在 Protocol 配置區，勾選 Modbus RTU 5.按下 OK 鍵 6. 按下 Start Search 鍵來搜尋 DL-10 模組 7. DL-10 模組將被顯示在列表中，然後按下 Stop Search 鍵 參考資訊 DL-10 產品網頁: http://www.icpdas.com/root/product/solutions/remote_io/rs-485/dl_series/dl-100t485.html 相關文件: http://ftp.icpdas.com/pub/cd/usbcd/napdos/dl_100/ 免費開發軟體 – DCON Utility Pro: http://www.icpdas.com/root/product/solutions/software/utilities/dcon_utiltiy_pro.html...