Clas Ohlson 36-2883 Quick Start Manual

Thermometer
Article number: 36-2883
Please read the entire instruction manual before
using and save it for future use. We apologise for any
text or photo errors and any changes of technical
data. If you have any questions concerning techni-
cal problems please contact our Customer Service
Department.
Thermometer
• Shows indoor and outdoor temperature with
clock. Memory for max and min temperature.
• Alarm function. Shows temperature in C°or in Fº.
• Outdoor transmitter with 1.5 m cable. Operates
on one battery type LR03 (not included).
• Push button [Cº/Fº] to change between Celsius
and Farenheit.
Put a battery in
1. Open the battery cover on the back. Push down
the battery cover at the arrow marking and loosen
it in the direction of the arrow.
2. Insert a R03 battery (not included) according to
the marking in the battery pocket on the back.
Set time
1. Push and hold in [MODE/SET]
2. 24/12 hr blinks, choose 12 or 24 hours display by
pushing [MODE/SET].
3. The first digit on the display (hour) blinks, set
correct hour by pushing on [MAX/MIN] repeatedly.
Confirm setting by pushing on [MODE/SET].
4. Next digit on display (minutes) blinks, choose
correct minute by pushing on [MAX/MIN]
repeatedly (hold in button to come to desired
setting quicker). Confirm setting by pushing
[MODE/SET].
Set alarm
1. Push once on [MODE/SET] to change to AL
(alarm), AL is shown on display. Push [MODE/
SET] and hold in until the first digit on the display
(hours) starts to blink.
2. Set desired alarm hour by pushing [MAX/MIN]
repeatedly. Confirm setting by pushing on
[MODE/SET].
3. Next digit on display (minutes) blinks, choose
correct minute by pushing [MAX/MIN] repeatedly
(hold in button to come to desired time quicker).
Confirm setting by pushing on [MODE/SET].
GREAT BRITAIN For consumer contact, please visit www.clasohlson.
co.uk and click on customer service. Internet: www.clasohlson.co.uk
ENGLISH
Activate/shut-off alarm
1. Push and hold in [ALARM/ON/OFF] for 3 seconds
until a clock symbol is shown/disappears on
the display (lit clock symbol = Activated alarm
function, unlit clock symbol = alarm function
shut-off.
2. Push any button [MODE/SET], [MAX/MIN] or
[ºC/ºF] to shut off alarm completely.
3. Push [ALARM/ON/OFF] to shut off alarm
temporarily and activate "SNOOZE" function (the
alarm rings after 8 minutes).
MAX/MIN temperature
1. Push once [MAX/MIN] to show MAX temperature
on the display, IN (indoor temperature) and OUT
(outdoor temperature).
2. Push once [MAX/MIN] to show MIN temperature
on the display, IN (indoor temperature) and OUT
(outdoor temperature).
3. Push once [MAX/MIN] to return to showing of
present temperature on the display.
Restoring Min/Max temperature
Push [MODE/SET] when MAX/MIN temperature is
shown on the display, to reset display of MAX/MIN
temperature.
Returning to normal setting
If the display shows strange symbols the thermome-
ter must be reset to normal setting. Take out batte-
ries and put them back after a few minutes or push a
small object in the "Reset" opening on the back until
the display blinks and then shows the same symbol.
Protect the environment
Sort your waste and recycle products instead of th-
rowing them away. It should be sorted and handled
according to local waste disposal ordinances.
Specifications
• Size: 130x70x20 mm
• Indoor temperature: 10ºC ~ +50ºC
• Outdoor temperature -50ºC ~ +70ºC
• Resolution scale: 0.1ºC
• Accuracy +/-1ºC
• Battery: LR03