Handlebar Switches - Yamaha MT-125 Owner's Manual

Instrument and control functions

Handlebar switches

Left
3
1. Pass switch "
2. Dimmer switch "
3. Horn switch "
4. Turn signal switch "
Right
1
1. Start/Engine stop switch "
Pass switch "
Press this switch to flash the headlight.
TIP
When the dimmer switch is set
to " ", the passing switch has no ef-
fect.
Dimmer switch "
Set this switch to "
beam and to "
1
2
4
"
/ "
"
/ "
/ /
"
/ "
" for the high
" for the low beam.
EAU1234M
Turn signal switch "
To signal a right-hand turn, push this
switch to "
turn, push this switch to "
released, the switch returns to the cen-
ter position. To cancel the turn signal
lights, push the switch in after it has re-
turned to the center position.
3
Horn switch "
Press this switch to sound the horn.
Start/Engine stop switch " /
To crank the engine with the starter,
set this switch to "
the switch toward "
for starting instructions prior to starting
the engine.
Set this switch to "
gine in case of an emergency, such as
when the vehicle overturns or when the
throttle cable is stuck.
"
EAU12352
EAU12402
3-12
/ "
". To signal a left-hand
". When
"
", and then slide
". See page 5-2
" to stop the en-
EAU12461
EAU12501
EAU68270
/ "