Yamaha MT-125 Owner's Manual page 24

Instrument and control functions
 Flash:
flashes when activated. (This
setting is selected when the
indicator light flashes four
times per second.)
 Off: the indicator light is deac-
tivated; in other words, it
does not come on or flash.
(This setting is selected when
the indicator light flashes
3
once every two seconds.)
2. Push the "SELECT" button to con-
firm the selected flashing pattern.
The shift timing indicator light
changes to the activation point
setting mode.
The tachometer will show the current
setting r/min for the activation point
and deactivation point setting modes.
To set the shift activation point
TIP
The shift timing indicator light activa-
tion point can be set between 9000
r/min and 13000 r/min. The indicator
light can be set in increments of 500
r/min.
1. Push the "RESET" button to select
the desired engine speed for acti-
vating the indicator light.
2. Push the "SELECT" button to con-
firm the selected engine speed.
The control mode changes to the
deactivation point setting mode.
the indicator light To set the shift deactivation point
TIP
 The shift timing indicator light de-
activation point can be set be-
tween 9000 r/min and 13000
r/min. The indicator light can be
set in increments of 500 r/min.
 Be sure to set the deactivation
point to a higher engine speed
than for the activation point, other-
wise the shift timing indicator light
will not come on.
1. Push the "RESET" button to select
the desired engine speed for de-
activating the indicator light.
2. Push the "SELECT" button to con-
firm the selected engine speed.
The control mode changes to the
brightness setting mode.
To adjust the shift brightness
1. Push the "RESET" button to select
the desired shift indicator light
brightness level.
2. Push the "SELECT" button to con-
firm the selected brightness level.
The display exits the shift timing
light control mode and returns to
the standard multi-function dis-
play mode.
Welcome screen
The welcome screen greets the rider
when the key is turned to "
messages "Hi Buddy" and "see you"
when the key is turned to "
user name "Buddy" is set as the facto-
ry default, but it can be set to your
name.
3-10
" with the
". The