Yamaha MT-125 Owner's Manual page 23

Average speed mode
1
ZAUM1579
1. Average speed display
Shows the vehicle's traveling speed
since it was last reset.
To reset the average speed display,
push and hold the "RESET" button un-
til the average speed flashes, and then
push the button again .
Brightness screen and shift timing
indicator light control mode
ZAUM1580
1. Shift timing indicator light
2. Brightness level display
This mode cycles through five control
functions in the order listed below.
 Brightness screen: the multi-func-
tion meter unit can be adjusted for
the brightness screen.
 Shift timing light flashing pattern:
this function allows you to choose
whether or not the indicator light
will come on and whether it should
flash or stay on when activated.
Instrument and control functions
1
2
 Shift timing light activation point:
this function allows you to select
the engine speed at which the in-
dicator light is activated.
 Shift timing light deactivation
point: this function allows you to
select the engine speed at which
the indicator light is deactivated.
 Shift timing light brightness: this
function allows you to adjust the
brightness of the indicator light.
To adjust the brightness screen and
shift timing indicator light
1. Turn the key to " ".
2. Push and hold the "SELECT" but-
ton.
3. Turn the key to " ", and then re-
lease the "SELECT" button after
five seconds. After that push the
"SELECT"
brightness screen can now be ad-
justed.
To set the brightness screen
1. Push the "RESET" button to select
the desired brightness level.
2. Push the "SELECT" button to
confirm the selected brightness
screen level.
screen light changes to the shift
flashing pattern setting mode.
To set the shift flashing pattern
1. Push the "RESET" button to select
one of the following flashing pat-
tern settings:
 On: the indicator light stays
on when activated. (This set-
ting is selected when the indi-
cator light stays on.)
3-9
button again. The
The brightness
3