Commandcentral Authentication Login - Motorola APX NEXT User Manual

Procedure:
1 From the Home screen, tap
2 Tap Soft ID, then enter your Soft ID.
3
Tap Done to confirm.
NOTE: If you leave the Soft ID empty, the Work Manager Widget displays the Radio
Alias ID if it is enabled.
5.1.4

CommandCentral Authentication Login

To log into the CommandCentral for the first time, simply follow the First-Time Login steps as follows.
NOTE: After selecting Remember my username, the First-Time Login steps will be skipped on
subsequent logins.
After you have logged in, you can view your agency details (Agency name, Unit ID, Auto logout date
and time). You will be notified when you are about to be logged out when you see a logout timer on the
widget. The timer is displayed 1 hour before the logout time if the session timeout is set to less than 29
days, or 20 hours before if session timeout is set to more than 29 days.
5.1.4.1
Logging In to CommandCentral (First-Time Login)
Procedure:
1 From the Home screen, tap
2 Tap CommandCentral Login, then enter your username or email address followed by your
password.
3 Tap Sign On.
4 Scroll down and tap the Received passcodes via email (if 2-factor authentication is enabled).
5 Enter the passcode and tap Verify to complete the log in (if 2-factor authentication is enabled).
5.1.4.2
Logging In to CommandCentral (Subsequent Login)
Procedure:
1 From the Home screen, tap
2 Tap CommandCentral Login, then enter your username or email address followed by your
password.
3 Tap Sign On, then enter the verification code generated by your device (if 2-factor
authentication is enabled).
NOTE:
You can request to resend the code to the connected device.
The code is 8 characters and can be alphanumeric.
Shift Manager Launcher.
Shift Manager Launcher.
Shift Manager Launcher.
MN005642A01-AN
Chapter 5 : Home Screen
35