Viqi; Table 5: Viqi Voice Control Commands - Motorola APX NEXT User Manual

MN005642A01-AN
Chapter 3 : Radio Overview
Function
Voice Announcement
Voice Mute
Volume Set Tone
Zone Bank Up
Zone Bank Down
Zone Select
3.2

ViQi

ViQi is a virtual assistant that helps you manage your radio and perform information lookups using
voice commands. This feature is purpose-built for public safety and is active when you press the
assigned ViQi button on the radio or an associated Remote Speaker Microphone (RSM).
ViQi Voice Control
ViQi Voice Control allows you to operate the radio with your voice, for example, to change zones,
channels, or volume.
NOTE: Voice Control follows the language that you set in the device. If you changed the device
language in RadioCentral or Customer Programming Software (CPS), your device automatically
downloads the new language files for this feature through LTE or Wi-Fi. This feature is disabled
until the languages files are downloaded successfully. Therefore, retry if your download fails.

Table 5: ViQi Voice Control Commands

The following table shows the functions supported by the ViQi Voice Control feature and their
respective commands.
Feature
Zone and Channel
Zone
20
Description
Audibly indicates the current feature mode, zone, or channel
that you are assigned to.
Allows you to mute the voice transmission of the current
zone and channel.
Sets the volume set tone.
Scrolls through the zone banks in ascending order.
Scrolls through the zone banks in descending order.
Allows you to select a zone from the switch.
Examples
To identify your current zone and channel, say:
• "What is my zone and channel"
• "Current zone and channel"
• "Zone and channel"
To change to a new zone and channel, say:
• "Zone <Zone Name>, channel <Channel Name>"
• "Change zone to <Zone Name>, channel to <Channel Name>"
• "Switch zone to <Zone Name>, channel to <Channel Name>"
To identify your current zone, say:
• "What is my zone"
• "Current zone"
• "Zone"
To change to a new zone, say: