Logging In To Automatic Registration Service; Logging Out Of Automatic Registration Service; Entering The Soft Id - Motorola APX NEXT User Manual

MN005642A01-AN
Chapter 5 : Home Screen
You can still send text messages without logging in as a user. The user login feature only enables the
recipient of your message to identify you as the sender by assigning a username to your message.
This feature is only applicable for LMR Messaging.
5.1.2.1

Logging In to Automatic Registration Service

Procedure:
1 From the Home screen, tap
2 Tap User Login, then perform one of the following actions:
If...
To log in with an existing ID,
To log in with a new ID,
3 Enter the authorized PIN, then tap
If a PIN is not assigned to the ID, skip this step.
The display shows the Progress screen. If the channel does not support Automatic Registration
Service login, the display shows the status as Offline.
4 While sign in is in progress, tap Hide.
After the login is completed, the Identity and Status Widget shows the login ID.
5.1.2.2

Logging Out of Automatic Registration Service

Procedure:
1 From the Home screen, tap
2 Tap your ID, then tap Yes to confirm the request.
3 Perform one of the following actions:
• To clear the private data, tap Yes.
• To keep your private data, tap No.
5.1.3

Entering the Soft ID

Soft ID entry is only allowed if it is enabled and User Login is not used.
34
Shift Manager Launcher.
Then...
Tap the ID.
a Tap Login with new ID.
b Enter the User Login ID, then tap
Done.
Done.
Shift Manager Launcher.