Troubleshooting - Rowenta IS9100D1 Manual

1103907038 IS9000 D1_110x220 25/06/10 11:28 Page7

Troubleshooting

Problems
There is no steam.
The steam flow
is low.
Water runs
through the holes
of the steambrush.
The steamer takes a
long time to heat.
If it is not possible to establish the cause of the problem, seek the assistance of an
pproved ROWENT Service Center www.rowenta.com
Possible causes
The appliance has not been
turned on.
The hose has been
obstructed.
There is no water left.
Your steamer has a build-up
of scale because it has not
been rinsed out regularly.
There is no water left.
There is condensation in the
hose.
Your steamer has a build-up
of scale because it has not
been descaled regularly.
Solutions
Check that your appliance is properly
plugged in and press the On / Off button
(on the front of the appliance).
The power light should turn on.
Check that the hose is not bent or twisted.
Turn off the appliance and refill the water
tank.
Descale the steamer at least once a year
or every 50 hours of use. If your water is
hard, increase the frequency.
Turn the appliance off and refill it.
Never use steamer in a horizontal posi-
tion. Hold the hose vertically outstretched
and wait for water to flow back into the
steamer.
Rinse out the steamer at least once
a year or every 50 hours of use. If your
water is hard, increase the frequency.
7
EN
E
FR
NL
IT
ES
PT
SV
EL
TR
RU
UK
PL