Table A-6: External Reference Input; Table A-7: Format Display - Sony Tektronix WFM 1125 User Manual

Appendix A: Specifications
Table A-5: Stripped AES/EBU digital audio output
Characteristic
Phase Lock Time
Output Channel
Output Control
1
Available only for Option 0A, 240M/274M fomat mode of Option 0C, or Interlace and Segment Frame modes of Option 0D.

Table A-6: External reference input

Characteristic
Sync Format
DC Input Impedance
Return Loss
Display Resolution
Uncertain Time Width

Table A-7: Format display

Characteristic
Display Contents
240M
274M
296M
A-6
1 (Cont.)
Performance requirements
Performance requirements
u15 kW
t5 ns
Performance requirements
Reference information
t15 s
CH A:1/2, 3/4, 5/6, 7/8
CH B:1/2, 3/4, 5/6, 7/8
The same channel is not selected on CHA
and CHB at the same time.
If the Audio Data Packet does not exist in the
serial signal, the corresponding output is
disabled.
Reference information
RS 170A, PAL (2 LEVEL mode of Option 0D)
SMPTE 240M, SMPTE 274M, SMPTE 296M
(3 LEVEL mode of Option 0D)
SMPTE 240M, SMPTE 274M (Option 0A or
240M/274M format mode of Option 0C)
SMPTE 296M (Option 0B or 296M format
mode of Option 0C)
Unterminated
u30 dB to 30 MHz
2 clock ]27 ns
Reference information
When 240M in the COLOR menu is selected.
When 274M in the COLOR menu is selected
or 1080/24p format signal is inputted.
When 720/60p or 720/59.94p format signal is
inputted.
WFM 1125 Option 0A/0B/0C/0D User Manual