Westinghouse WHE6170 User Manual page 15

Adjusting the Ice Bin Auger
STORAGE FEATURES
CAUTION
To avoid personal injury or property
damage, handle tempered glass
shelves carefully. Shelves may break
suddenly if nicked, scratched, or
exposed to sudden temperature
change. Allow the glass shelves
to stabilize to room temperature
before cleaning. Do not wash in
dishwasher.
You can easily adjust shelf positions in the
fresh food compartments to suit your needs.
The shelves have mounting brackets that
attach to slotted supports at the rear of each
compartment.
To change a shelf position:
1. Remove all food from shelf.
2. Lift the front edge up and pull the shelf
out.
3. Replace by inserting the mounting bracket
hooks into the desired support slots.
4. Lower the shelf and lock into position.
To adjust the flip shelf:
1. Remove food from shelf.
2. Lift the right side edge of shelf upwards
and push to the left towards ice maker
Flip Shelf
To adjust the slide-under/flip shelf:
1. Pull front half shelf forward until its back
drops down, then gently push front half
shelf back and under back half shelf.
Auger
2. With front half fully below back half, lift
front of shelf to flip it upwards toward the
back of the cabinet.
Drawers
Your refrigerator includes a variety of storage
drawers.
FreshSealTM Crisper (with automatic
humidity control)
Crisper drawers are designed for storing
fruits, vegetables, and other fresh produce.
Crispers have an auto humidity control (with
replaceable membrane) on the side of each
crisper under the humidity control cover.
To remove the auto humidity control
membrane:
1. Reach to back of humidity control cover.
2. Pull up on cover.
3. Pull cover towards back of cabinet and
remove.
4. Replace humidity membrane.
5. Replace cover by reversing the steps
above. Repeat for both crispers.
Slide-Under/Flip Shelf
Slide-Under/Flip Shelf
EN 15