Endress+Hauser Levelflex M FMP40 Operating Instructions Manual page 16

Mounting
Variant "2":
Separator
reference point of
measurement
M5x0.8
rope probe
rope:
Ø 4 mm/
or
Ø 6 mm/0.24"
or
Ø 8 mm/0.32", coated PA
Ø 22/0.87" (on 4 mm/
Ø 30/1.18" (on 6 mm/0.24" rope)
16
Levelflex M FMP40 - process connection, probe type
Housing dimensions → ä 15
F12 / T12 / F23 housing
4 x Ø 8.5
Ø 60.3
Ø 76
Threaded connection
G ¾ (¾ BSP)
or ¾ NPT
SW 50
M10x1.0
0.16"
internal thread:
M14 on 4 mm/0.16" rope
M20 on 6 mm/0.24" rope
0.16" rope)
Variant "3":
remote electronic
88
Ø 21.3
Ø 76
Threaded connection
G 1 ½ (1 ½BSP)
or 1 ½ NPT
SW 60
40
Ø
rod probe
Ø 6/0.24" (on ¾" thread)
Ø 16/0.63" (on 1½" thread
or flange)
Ø 45 / Ø 75
Ø 45 Option 80, feature "B, D, F, H"
Ø 75 Option 80, feature "C, E, G, I"
Levelflex M FMP40 with HART/4...20 mA
Variant "4":
remote electronic
with angled adaptor
Ø 76
Ø 81
Flange DN 40...200
or equivalent
Ø 60
Ø 67,8
M10x1.0
Probe rods in Alloy C22
40
Ø
consist of 1 piece
(can not be dismantled)
coax probe
3 x Ø 8
Ø 21,3/0.84" (on ¾" thread)
Ø 42,4/1.67" (on 1½" thread
or flange)
Endress + Hauser
L00-FMP4xxxx-06-00-00-en-007