Table of Contents
Advertisement
Initial Setup
Wall Mounting
Refer to the table below for the standard dimensions for wall mount kits.
NOTE: For use only with a UL certified wall mount kit/bracket. To obtain a wall-
mounting kit or height adjustment base, contact ViewSonic® or your
local dealer.
Maximum
Hole pattern
Loading
14 kg
100 x 100 mm 115 x 115 x 2.6 mm Ø 5 mm
NOTE: Wall mount kits are sold separately.
1. Turn off the device and disconnect all cables.
2. Place the device on a flat, stable surface with the screen facing down. Unscrew
and remove the adjustable foot.
3. Attach the mounting bracket to the VESA mounting holes at the rear of the
display. Then secure it with four (4) screws (M4 x 10 mm).
4. Follow the instructions that come with the wall mounting kit to mount the
display.
Interface Pad
(W x H)
(W x H x D)
Pad Hole
100 mm
10
Screw Specification
& Quantity
M4 x 10 mm
4 pieces
Advertisement
Table of Contents
