Warranty information contained in this User Guide will describe your limited coverage from ViewSonic Corporation, which is also found on our web site at http://www.viewsonic.
Page 2
ViewSonic is dedicated to exceeding the world’s expectations for technological evolution, innovation, and simplicity. At ViewSonic, we believe that our products have the potential to make a positive impact in the world, and we are confident that the ViewSonic product you have chosen will serve you well.
Compliance Information For U.S.A. This device complies with part 15 of FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interfer- ence, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Page 4
CE Conformity for European Countries The device complies with the EMC Directive 2004/108/EC and Low Voltage Directive 2006/95/EC. Following information is only for EU-member states: The mark shown to the right is in compliance with the Waste Electri- cal and Electronic Equipment Directive 2012/19/EU (WEEE). The mark indicates the requirement NOT to dispose the equipment as unsorted municipal waste, but use the return and collection systems according to local law.
Important Safety Instructions 1. DO NOT place objects on top of the device, as objects may scratch the screen. 2. DO NOT expose the device to dirty or dusty environments. 3. DO NOT place the device on an uneven or unstable surface. 4.
Declaration of RoHS2 Compliance This product has been designed and manufactured in compliance with Directive 2011/65/EU of the European Parliament and the Council on restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS2 Directive) and is deemed to comply with the maximum concentration values issued by the European Technical Adaptation Committee (TAC) as shown below: Proposed Maximum...
Contents Compliance Information.............i Important Safety Instructions ........... iii Declaration of RoHS2 Compliance ..........iv Copyright Information ...............v Product Registration ..............v 1. Introduction ................1 1.1 Packing list ..................1 1.2 Product overview ................1 2. Installation and Setting ............3 2.1 Install driver ..................3 2.2 Set the display area .................
1. Introduction 1.1 Packing list After unpacking, please confirm whether the following contents are included: Electromagnetic pen display Electromagnetic pen display support Power adapter USB 2.0 Y cable Electromagnetic pen Pen rope Pen tip x 3 ...
Page 10
1.2.2 Rear view ⑦ Pen slot ⑧ Pen rope hole (×2) ⑨ Lock hole (×2) ⑩ USB output interface Power interface Note: please don't open the enclosure, which exists electric shock hazard. Please contact with the service personnel for any problem. 1.2.3 Interactive electromagnetic pen The interactive electromagnetic pen is made with electromagnetic resonance technology and does not require batteries.
2. Installation and Setting 2.1 Install driver Connect the device and PC/NB with attached USB cable and plug in the power adapter, as shown below. 2.1.1 Install DisplayLink display adapter driver and software 1) Open the driver and attached software disk, and click and install [DisplayLink-xx.exe] at Windows.
Page 12
2.1.2 Install handwriting driver 1) Open the driver disk, click and install [viewsonic-xx.exe] at Windows, Pen Display Manager will appear on the start page immediately. 2) Then, complete all steps as per the setting guide.
3) You must reboot the computer after the installation is completed. 2.2 Set the display area Windows 7 and Windows 8 setting environments Press [Start] icon, open [Control panel], enter into [Display] and select [Adjust resolution], then the setting window will open. 1) When installing Pen Display device, you will see an additional [Multiple Displays] option.
2.3 Handwriting area correspondence 1) Select the image on the bottom right hand corner to enter the setting. 2) Under “Pen” tab, adjust the tip feel from soft to firm. 3) Under the “Mapping” tab, set the “Orientation” to “Portrait” and “Select the Pen Display”...
2.4 More touch settings Windows 7/8 system is equipped with other touch functions. All settings in this chapter are based on this system. 2.4.1 Pen and touch Click [Start] icon → [Control panel] → [Pen and touch]. a. Handwriting pen option: when operating the items on the screen with electromagnetic pen, you can adjust the action of each electromagnetic pen and the setting of electromagnetic pen button.
Page 16
2.4.2 Tablet PC setting Click [Start] icon → [Control panel] → [Tablet PC setting] → click [Other] tab → click [Go to input panel setting]. These settings can be used to customize the following input panel functions of tablet PC. Handwriting: setting of stroke thickness and writing line spacing.
3. Troubleshooting 3.1 Screen problems Problems Recommended actions No picture * Check whether USB cables at computer end and screen end are connected properly. * Try to use another USB interface of the computer. * Confirm whether the computer is under sleep mode. Press the keyboard or move the mouse, and reboot the system.
3.2 Problems of interactive electromagnetic pen Problems Recommended actions Electromagnetic * Try to confirm by mouse. If the mouse does not work, pen does not please reboot the computer or the application. work * Try to re-install the driver Pen tip is too * Please check whether the pen tip is too short.
5. Appendix 5.1 Replace the pen tip If the pen tip is too short or exists the sharp edge, it can be replaced to the back-up tip. Please replace according to the following steps: 1) Pull out the pen tip from electromagnetic pen straightly with tool. 2) Insert new pen tip into the handwriting pen and then push in the pen tip untill the tip does not move.
How long the warranty is effective: ViewSonic Pen Displays are warranted for 1 year for all parts and labor from the date of the first consumer purchase. Who the warranty protects: This warranty is valid only for the first consumer purchaser.
Page 24
Exclusion of damages: ViewSonic's liability is limited to the cost of repair or replacement of the product. ViewSonic shall not be liable for: 1. Damage to other property caused by any defects in the product, damages based upon inconvenience, loss of use of the product, loss of time, loss of...