Table of Contents
Advertisement
Quick Links
PD0711
Pen Display
User Guide
IMPORTANT: Please read this User Guide to obtain important information on installing and using your product in
a safe manner, as well as registering your product for future service. Warranty information contained in this User
Guide will describe your limited coverage from ViewSonic® Corporation, which is also found on our web site at
http://www.viewsonic.com in English, or in specific languages using the Regional selection box in the upper right
corner of our website.
Model No. VS16287
P/N: PD0711
Advertisement
Table of Contents
Related Manuals for ViewSonic VS16287
Summary of Contents for ViewSonic VS16287
- Page 1 Warranty information contained in this User Guide will describe your limited coverage from ViewSonic® Corporation, which is also found on our web site at http://www.viewsonic.com in English, or in specific languages using the Regional selection box in the upper right corner of our website.
- Page 2 As a world-leading provider of visual solutions, ViewSonic® is dedicated to exceeding the world’s expectations for technological evolution, innovation, and simplicity. At ViewSonic®, we believe that our products have the potential to make a positive impact in the world, and we are confident that the ViewSonic® product you have chosen will serve you well.
-
Page 3: Safety Precautions
Do not place any heavy objects on the device or connection cables. • If smoke, an abnormal noise, or a strange odor is present, immediately turn the device off and call your dealer or ViewSonic®. It is dangerous to continue using the device. •... -
Page 4: Table Of Contents
Contents Safety Precautions ............3 Introduction ..............6 Package Contents ....................6 Product Overview ....................7 Making Connections ............ 8 Installing Drivers and Software ................8 DisplayLink Driver ....................8 Pen Display Driver ....................9 Connecting the Pen Display ..................10 Using the Display ............11 Using the Pen Tether ....................11 Adjustable Stand Legs ...................12 Setting the Display Area ..................13... - Page 5 Regulatory and Service Information ......21 Compliance Information ..................21 FCC Compliance Statement ................... 21 Industry Canada Statement ................... 21 CE Conformity for European Countries ..............21 Declaration of RoHS2 Compliance................. 22 Indian Restriction of Hazardous Substances ............23 Product Disposal at End of Product Life ..............23 Copyright Information ..................24 Customer Service ....................
-
Page 6: Introduction
Install DisplayLink and PenDisplayDriver Installer DisplayLink et PenDisplayDriver Instalar DisplayLink y PenDisplayDriver ViewSonic Pen Display Website: https://www.viewsonic.com/viewsign/products Customer service contact information: USA- ViewSign@viewsonic.com / China- ViewSign@cn.viewsonic.com / Global- ViewSign@tw.viewsonic.com Pen tether Nib removal tool Quick Start Guide NOTE: The contents included in your package may vary depending on your... -
Page 7: Product Overview
Product Overview USB Port Pen Tether Pen Holder Wall Mounting Anchor Point Points 8. Pen Display Screen Security Lock Adjustable Slot Stand Leg... -
Page 8: Making Connections
Making Connections Installing Drivers and Software System Requirements: Operating system: Windows XP/7/8/10 (32/64 bit) PC I/O: USB 2.0/above Before connecting and using the pen display, it is necessary to install the below drivers and software. The drivers and software can be downloaded at: http://www.viewsonicglobal.com/q/PD0711 DisplayLink Driver Open the DisplayLink installation file and install the driver. -
Page 9: Pen Display Driver
Pen Display Manager can be used to map the active area and adjust the feel of the pen. 1. Open the ViewSign Console installation file and install the driver. 2. After the installation completes, you will need to restart the computer. NOTE: For further ViewSign Console information, please visit: https://manuals.viewsonic.com/ViewSign_Software... -
Page 10: Connecting The Pen Display
Connecting the Pen Display 1. Turn the device over so the bottom side is facing up. Bottom 2. Plug the USB Type A end of the USB cable into the USB Port on the device. 3. Connect the Main USB A cable to the computer. The Secondary USB A cable can be connected to a fully powered USB port on the computer. -
Page 11: Using The Display
Using the Display Using the Pen Tether The Pen Tether can be attached to the Pen and to the available anchor point. 11 11... -
Page 12: Adjustable Stand Legs
Adjustable Stand Legs There are two (2) adjustable stand legs on the pen display. This allows for a viewing angle of 3.5°, 16°, 21° in landscape orientation. -
Page 13: Setting The Display Area
Setting the Display Area After the pen display is connected to the computer, the Display settings will need to be adjusted. To access your computer’s Display settings: • Go to: Start > Settings > System > Display, or • Right Click on the Desktop and select Display settings. Once inside the Display settings, ensure the pen display is selected and: •... -
Page 14: Pen Input Area Mapping
Pen Input Area Mapping To set the proper pen input area, 1. Open Pen Display Manager either by going to: Start > ViewSonic > Pen Display Manager or selecting the Pen Display Manager icon from the System Tray. Additionally, the driver can also be accessed from ViewSign Console - either the widget or by right-clicking the ViewSign Console icon in the system tray and selecting Pen Display Driver. - Page 15 4. Select the Pen tab to adjust Tip Feel and check the Current Pressure. NOTE: Tip Feel alters how much actual pressure it takes to achieve maximum pressure. • Soft - requires less actual pressure to see a difference in pen pressure levels.
-
Page 16: Appendix
Appendix Specifications Display Item Category Specifications 1024 x 600 LCD, Type 0.1506 mm x 0.1432 mm pixel pitch Surface Treatment Anti-Glare, Hard-Coating (8H) Resolution Supported 1024 x 600 @ 60Hz Power USB 2.0: 5V/0.65A Max Display Area Full Scan (H x V) 152.21 x 85.92 mm (5.99”... -
Page 17: Product Dimensions
Product Dimensions 23 mm 180 mm 145 mm 9.2 mm 129.95 mm 17 17... -
Page 18: Troubleshooting
Troubleshooting This section describes some common problems that you may experience when using the monitor. Problem or Issue Possible Solutions • Ensure the USB cable is connected properly at both ends. • Ensure USB A connectors are connected directly to the PC - not to an external hub. -
Page 19: Maintenance
• ViewSonic® does not recommend the use of any ammonia or alcohol-based cleaners on the display screen or case. Some chemical cleaners have been reported to damage the screen and/or case of the monitor. • ViewSonic® will not be liable for damage resulting from use of any ammonia or alcohol-based cleaners. -
Page 20: Replacing A Pen Nib
Replacing a Pen Nib When the pen nib gets too short or develops a sharp edge, it can be replaced with spare nibs. To replace a pen nib: 1. Use the nib removal tool to pull the old nib straight out of the pen. 2. -
Page 21: Regulatory And Service Information
Regulatory and Service Information Compliance Information This section addresses all connected requirements and statements regarding regulations. Confirmed corresponding applications shall refer to nameplate labels and relevant markings on the unit. FCC Compliance Statement This device complies with part 15 of FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. -
Page 22: Declaration Of Rohs2 Compliance
The following information is only for EU-member states: The mark shown to the right is in compliance with the Waste Electrical and Electronic Equipment Directive 2012/19/EU (WEEE). The mark indicates the requirement NOT to dispose of the equipment as unsorted municipal waste, but use the return and collection systems according to local law. -
Page 23: Indian Restriction Of Hazardous Substances
Schedule 2 of the Rule. Product Disposal at End of Product Life ViewSonic® respects the environment and is committed to working and living green. Thank you for being part of Smarter, Greener Computing. Please visit the ViewSonic®... -
Page 24: Copyright Information
ENERGY STAR® is a registered trademark of the U.S. Environmental Protection Agency (EPA). Disclaimer: ViewSonic® Corporation shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or consequential damages resulting from furnishing this material, or the performance or use of this product. -
Page 25: Customer Service
For technical support or product service, see the table below or contact your reseller. NOTE: You will need the product’s serial number. Country/ Region Website Country/ Region Website Asia Pacific & Africa Australia www.viewsonic.com/au/ Bangladesh www.viewsonic.com/bd/ www.viewsonic.com.cn www.viewsonic.com/hk/ 中国 (China) 香港 (繁體中文) Hong Kong (English) www.viewsonic.com/hk-en/ India www.viewsonic.com/in/... -
Page 26: Limited Warranty
“What the warranty excludes and does not cover” section). How long the warranty is effective: ViewSonic® displays are warranted for between 1 and 3 years, depending on your country of purchase, for all parts including the light source and for all labor from the date of the first consumer purchase. - Page 27 (e) the serial number of the product. • Take or ship the product, freight prepaid, in the original container to an authorized ViewSonic® service center or ViewSonic®. • For additional information or the name of the nearest ViewSonic® service center, contact ViewSonic®. Limitation of implied warranties:...
- Page 28 Exclusion of damages: ViewSonic’s liability is limited to the cost of repair or replacement of the product. ViewSonic® shall not be liable for: • Damage to other property caused by any defects in the product, damages based upon inconvenience, loss of use of the product, loss of time, loss of...
-
Page 29: Mexico Limited Warranty
If a product proves to be defective in material or workmanship during the warranty period, ViewSonic® will, at its sole option, repair or replace the product with a like product. Replacement product or parts may include remanufactured or refurbished parts or components &... - Page 30 Exclusion of damages: ViewSonic®’s liability is limited to the cost of repair or replacement of the product. ViewSonic® shall not be liable for: • Damage to other property caused by any defects in the product, damages...
- Page 31 Name, address, of manufacturer and importers: México, Av. de la Palma #8 Piso 2 Despacho 203, Corporativo Interpalmas, Col. San Fernando Huixquilucan, Estado de México Tel: (55) 3605-1099 http://www.viewsonic.com/la/soporte/index.htm NÚMERO GRATIS DE ASISTENCIA TÉCNICA PARA TODO MÉXICO: 001.866.823.2004 Hermosillo: Villahermosa: Distribuciones y Servicios Computacionales SA de CV.
- Page 32 C0 M91 Y72 K24 Process Color C0 M0 Y0 K100 Process Color C0 M91 Y72 K24 Process Color Pantone Black C Spot Color Pantone 187 C Spot Color...