Unpacking And Checking Contents; Package Contents Description - RIDGID R4840 Operator's Manual

UNPACKING AND CHECKING CONTENTS

For your own safety, never connect plug to
power source outlet, or insert switch key until all assembly steps
are complete and until you have read and understood the entire
owners manual.
To reduce the risk of injury, if any parts are
missing, do not attempt to assemble the sander, plug in the power
cord, or turn the switch on until the missing parts are obtained
and installed correctly.
1.
Remove tool from carton by lifting unit.
2.
Place the tool on a secure, stationary work surface and
look the tool over carefully.
PC1

PACKAGE CONTENTS DESCRIPTION

PC1 Oscillating Edge Belt/Spindle Sander
1/2 inch x 4 1/2 inch Sanding Sleeve
PC2
3/4 inch x 4 1/2 inch Sanding Sleeve
PC3
1 inch x 4 1/2 inch Sanding Sleeve
PC4
NOTE: Before beginning assembly, check that all parts are
included. If you are missing any part, do not assemble the sander.
Call 1-888-359-4778 or E-mail us at: RidgidWoodworking@
ridgidproducts.com if any parts are damaged or missing.
Sometimes small parts can get lost in packaging material. Do not
throw away any packaging until sander is put together. Check
packaging for missing parts before contacting RIDGID
NOTE: The sander is shipped with the 4 inch x 24 inch sanding
belt.
NOTE: Parts shown are not actual size.
PC2
PC5 1 1/2 inch x 4 1/2 inch Sanding Sleeve
2 inch x 4 1/2 inch Sanding Sleeve
PC6
3/4 inch x 4 1/2 inch Drum
PC7
1 inch x 4 1/2 inch Drum
PC8
12
PC3 PC4 PC5
PC7 PC8 PC9
PC11
PC9 1 1/2 inch x 4 1/2 inch Drum
2 inch x 4 1/2 inch Drum
PC10
Table Insert
PC11
Sanding Belt Assembly
PC12
.
®
PC6
PC10
PC12