Table of Contents
Advertisement
ON-OFF SWITCH
The On-Off switch has a locking feature. This Feature is intended
to help prevent unauthorized and possible hazardous use by
children and others. See Figures 13 and 14.
1.
To turn sander "ON" lift the red switch to enable power to
the machine.
2.
To turn sander "OFF". Push switch in.
3.
To lock this switch while you are away, press the switch
to the off position and use a lock to lock the switch down
so the machine switch cannot be lifted to power it on.
For your own safety, always lock the switch
"OFF" when sander is not in use. Also, in the event of a power
failure (all of your lights go out) turn switch off.
Before turning switch on, make sure the belt or
drum and sleeve are properly installed.
ON-OFF SWITCH PADLOCK FEATURE
To avoid accidental starting by young children or others not
qualified to use the tool, the use of a padlock is required to lock
out ON/OFF Switch:
1.
Open the Padlock.
2.
Insert through hole in the start button.
3.
Close the Padlock.
4.
Place the Key in a safe place out of the reach of children.
See Figures 15 and 16.
OPERATION
20
FIGURE 13
FIGURE 14
FIGURE 15
FIGURE 16
Advertisement
Table of Contents
