Comfort Glow QDE1350 Owner's Manual page 8

3. Setting the POWER OFF TIMER Function
Note: The Power-Off-Timer Function will allow for the heater to power OFF after a certain set time, and can only be set
while the heater's display is in the "On" position.
OR
4. Setting the POWER-ON-TIMER Function
(Note: The Power-ON-Timer Function will allow for the heater to power ON after a certain set time, and can only be set
while the heater's display is in the "Off" position.
Turn the heater to the "On" position. Press the Timer button on
the heater's control panel or the remote.
The digital display changes from the "temperature" to the
"hours" option for the timer. Continue to press the timer button
to change the number of hours you would like the heater to run
before powering itself off. The hour options for the timer are
from 0 to 12 hrs. (in 1 hr increments).
The selected hour increments will flash for a few seconds, and
then revert back to the set desired temperature. The Timer
indicator light will remain lit as long as the Timer is set. The
heater will power OFF when the internal heater clock counts
down the hour increments you set.
Turn the heater to the "OFF" position. Press the Timer button on
the heater's control panel or the remote.
The digital display shows the "hours" option for the timer.
Continue to press the timer button to change the number of
hours you would like the heater's internal clock to count down
before powering itself on. The hour options for the timer are
from 0 to 12 hrs. (In 1 hr increments).
The Timer indicator light will remain lit as long as the Timer is set.
The heater will power itself ON when the internal heater clock
counts down the hour increments you set.
8