Remote Operation - Comfort Glow QDE1350 Owner's Manual

REMOTE OPERATION

PREPARATION
Place the heater on a firm, level surface and plug into a grounded 120V 60Hz power outlet. And turn on the
power switch in the rear of the unit. Only operate heater in upright position with caster wheels attached.
Insert 2 AAA batteries into the remote control before using (Batteries Not Included)
PUSH
Cover
Temp up button: to make target temperature rise
ON/OFF button: Used for power-on or power-off
Temp down button: to make target temperature decline
Mode button：Used for mode selection
℃/℉ button: Button for alternating between Fahrenheit
and Celsius
Timer button: Used for setting timer and adjust time value
of timing.
Battery
6