Dvd/Cd Functions - Akai ACVDS736 User Manual

DVD/CD functions

● Switch on the units. Select the DVD mode.
● To insert a disc:
• Press the OPEN button (1) to open the disc compartment.
• Insert the disc with the label upwards.
• Close the disc compartment.
The display shows the total number of tracks on the CD.
● To start playback, press the PLAY/PAUSE button (43) once.
● For extended instructions, read the paragraph "DVD/CD functions" further
on in this manual.
USB functions
● Switch on the master unit.
● Insert the USB device in the slot (7). The device can only be connected
one way.
● Select the USB mode.
● To start playback, press the PLAY/PAUSE button (43) once.
SD/MS/MMC functions
● Switch on the master unit.
● Insert the SD/MS/MMC device in the slot (2). The device can only be
connected one way.
● Select the memory card mode.
● To start playback, press the PLAY/PAUSE button (43) once.
5.3 DVD/CD functions
After the disc has been loaded, the disc starts automatically
● Press the arrow buttons (28) to select a menu item for DVDs.
● Press the ENTER button (29) to enter the selected menu item.
During playback, the following functions are available:
● To select a chapter (DVD) or track (CD), press the digit buttons (43).
● To select the next or previous chapter (DVD) or track (CD), press the
PREV button (37) or the NEXT button (38).
● To forward or rewind the DVD, press the FWD button (36) or the REV
button (35). The available speed rates are: 2x, 4x, 8x, 16x, 32x.
● To pause playback, press the PLAY/PAUSE button (43) once. To resume
playback, press the PLAY/PAUSE button (43) again.
ACVDS736
11