Table of Contents
Advertisement
Front Panel
1
2
INPUT
SELECT
/ l
9
11
8
10
1. POWER (
)
/ l
Sets the unit to On and Standby.
2. INPUT SELECT
Select the input source.
Turn this knob until the input source you want
appears in the display window.
3. DISPLAY
Displays various information about the currently
selected input source.
4. Display window
5. M1, M2, M3
Loads and stores various settings on this buttons
you set at one time.
6. Remote sensor
Receives control signals from the remote control.
7. MASTER VOLUME
Adjusts the volume of the unit to MIN (- 70.0dB)
through MAX (+10.0dB).
8. PHONES connector
Connect a stereo headphone plug ( 6.3 mm) to
PHONES connector for private listening.
9. SPEAKER LEVEL
Adjusts the level of each speaker.
10. TEST TONE
Checks the position and sound balance of
speakers in the following order.
(Front left speaker → Center speaker → Front right
speaker → Surround right speaker → Surround left
speaker → Subwoofer)
11. DIGITAL
Selects the input mode (ANALOG, COAXIAL,
OPTICAL 1/2/3).
3
4
5
DISPLAY
M1
M2
13
15
17
12
14
16
12. FM/AM
13. SURROUND MODE
14. DSP (Digital Signal Processor)
15. BYPASS
16. SETUP
17. b/B/v/V (left/right/up/down)
18. USB port
19. OPTICAL IN3
20. PORTABLE-IN (3.5 )
21. AV IN (AUDIO L/R, VIDEO)
6
MASTER VOLUME
M3
19
20
18
Selects the unit's tuner (FM and AM bands).
Selects various surround effect.
Selects DSP (Digital Signal Processor) mode.
Selects BYPASS mode.
Accesses or removes the setup menu.
Selects an item in the menu.
(ENTER)
Acknowledges the menu selection.
PRESET (-/+)
Selects preset number of radio.
TUN. (-/+)
Tunes in the desired radio station.
Connect a USB port of USB device.
Connect a component with digital audio output
jacks.
Connect a portable component.
Connect the components with analog audio/video
output jacks (camcorder,game console, etc).
7
21
5
Advertisement
Table of Contents
