LG RNC5 - High Power Speaker System Simple Manual

Also See for RNC5:

Table of Contents

What's in the Box

Please read this manual carefully before operating your set and retain it for future reference.

Top panel

(Standby)
Turns the power on or off.
USB REC / DEMO
- Records to USB.
- Stops recording.
- In power off status, if you press USB REC / DEMO, show demo mode.
USB1 Port
You can play sound files by connecting the USB device.
Display window
USB 2 Port
You can play sound files by connecting the USB device.
F (Function)
Selects the function and input source.
LIGHTING
Selects the lighting mode.
TWIN
Connects two units for TWIN mode in WIRELESS PARTY LINK.
(Skip/Search)
- Skips backward or forward.
- Searches for a section within a file.
- Selects the radio stations.
- Scans DAB+ stations by pressing and holding.

(Play/Pause)

Starts or pauses playback.
Selects stereo/mono.
Bluetooth connection lock (BT LOCK): Select the Bluetooth function by pressing F repeatedly. And long press N to limit Bluetooth connection to only BT and LG TV.

AUTO DJ / RDS

VOL (Volume) -/+
Adjusts speaker volume.
MIC (Microphone) / GUITAR -/+
Adjusts Microphone volume or Guitar volume.

(Auto Music Play)
Plays the audio currently playing by tagging the mobile (with "LG XBOOM" App) to this unit. (Android Only)
VOICE CANCELLER
You can reduce the vocal tones during music playback from various input sources.
EQ
Chooses sound impressions.
CLUB, DRUM, USER (DJ PAD)
Selects CLUB, DRUM or USER sound effect to mix. (If you want to use USER, you have to register a source with "LG XBOOM" app. (Android Only))
1, 2, 3 (DJ PAD)
Press a desired sound pad.
MIC (Microphone) ECHO
Selects ECHO mode.
VOCAL EFFECTS
Selects various vocal effects mode.
KEY CHANGER ( )
Changes the key to suit your vocal range
Remote sensor
SPECIAL EQ / BASS BLAST (or BASS BLAST+)

Front panel

Rear panel

Android

iOS

Download the LG XBOOM App to your device.

For more information, download the online owner' s manual. http://www.lg.com

Power Requirements	Refer to the main label on the unit.
Power Consumption	Refer to the main label on the unit.
Power Consumption	Networked standby: 0.5 W (If all network ports are activated.)
Dimensions (W x H x D)	Approx. 330.0 mm x 685.0 mm x 344.0 mm
Bus Power Supply (USB)	5 V 500 mA

Design and specifications are subject to change without notice.

Connect the power cord to wall outlet directly if possible. Or when you use an extension cable, it is highly recommended to use an extension cable of 110 V / 15 A or 230 V / 15 A, otherwise the unit may not operate properly because of the lack of power supply.
Do not overload the extension cord with excessive electrical load.

warning Note

Do not look directly at the light emitting part when the LIGHTING is turned on.
If the illumination brightness is glaring, switch on the room lights or turn off the LIGHTING of the unit.