d2itsu APD-9CK User Manual page 31

Installation in a sliding sash window
6. Cut the sponge B to a proper length and attach it to the window stool.
7. Install the window panel into the window stool.
7.1 If the heigth of the window is less than 20.5"(520mm).
The window panel cannot be installed in windows less than 20.5"(520mm) high.
(1) Remove the adjustment panel from the window panel, and cut the window
panel to the same width as the window.
(2) Open the window sash and place the window panel on the window stool.
(3) Secure the window panel to the window stool with screws.
adjustment panel
7.2 If the inner width of the window is between 20.5" (520mm) and 37.4"(950mm)
inclusive.
(1) Open the window sash and place the window panel on the window stool.
(2) Slide the adjustment panel to fit the window stool height.
(3) Secure the window panel to the window stool with screws.
Adjustment panel
Window panel
assemble
Window panel assemble
Cut
Screws
sponge B (adhesive)
Window
panel
Adjustment
panel
28
<20.5"
20.5"~37.4"