Installation In A Sliding Sash Window - d2itsu APD-9CK User Manual

Installation in a double-hung sash window
9. Close the window sash securely against the Window panel.
10. Cut the sponge A to a proper length and seal the gap between upper part of inner
window sash and outer window sash.
11. Fix the inner window with window bracket and screw, so that it can not slide
vertically.
sponge A

Installation in a sliding sash window

1. Install rear clip — aim the rear clip(upper) at the rear clip(lower),fix them together,
press the clasp forcibly in to the groove.
rear connector (upper)
rear connector (lower)
2. Clamp joint B+C into the inner side of window panel along the direction of arrow.
plastic window
outer window
wooden window
inner window
clasp
26
window sash
window bracket