Network Camera Setup - Advanced Technology Video D1 Instruction Manual

3.5 Network Camera Setup

This section describes how to configure the network camera, and is intended for product
Administrators, who have unrestricted access to all the Setup tools; and Operators, who have access
to the settings for Basic, Live View, Video & Image, Audio, Event, and System Configuration.
You can configure the network camera by clicking Setup in the top right-hand corner of the Live View
page. Click on this page to access the online help that explains the setup tools
When accessing the Network Camera for the
first time, the "Admin Password" dialog
appears. Enter your admin name and
password, set by the administrator.
Note: If the password is lost, the Network
Camera must be reset to the factory default
settings. See "3.8 Resetting to the Factory
Default Settings"
20