Table of Contents
Advertisement
•
If the left mounting location is in drywall, first install a drywall anchor, and then thread the
screw into the drywall anchor.
Do not thread the mounting screw all the way in. The screw head should protrude
approximately 0.25 inches (0.64 centimeters) from the mounting surface so that you can hang
the recorder on it.
8
Hang the recorder on the mounting screws. You can mount the recorder with the faceplate up
or down, but the underside of the recorder (with the feet) must always face the wall.
The recorder drops approximately 0.5 inches (1.27 centimeters) when hung on the mounting
screws. The screws lock into the mounting hole keyways, providing a positive locking
mechanism.
9
Tighten the mounting screws.
Desk-Mounting
The unit is shipped with rubber feet attached to the bottom of the unit, so that you can safely
mount it on a desk.
WARNING: To ensure the unit meets the recommended operating temperature, the unit must be desk-
mounted in a location that ensures that it is unobstructed on all sides.
ATTENTION : Pour garantir que l'unité respecte la température de fonctionnement recommandée, l'unité
doit être montée sur un bureau dans un endroit qui garantit qu'elle est dégagée de tous les côtés.
8704 S Hybrid NVR (Gen 2) Installation Guide
Mounting Screw
Unit Setup
28
Advertisement
Table of Contents
