Packaging/Shipment Contents - March Networks 8704 S Hybrid NVR Installation Manual

Hide thumbs Also See for 8704 S Hybrid NVR:
Table of Contents

Advertisement

Packaging/Shipment Contents

The following items are included in each system shipment, and should be located/verified before
installation begins:
Network video recorder
AC power cord and power adapter
Terminal blocks
Hard drive mounting screws - Four (4) screws per drive. If hard drives are installed, screws are
in use.
Data and power cables for the hard drives
Software DVD — The software can also be downloaded from the March Networks Partner
Portal.
Technical publications — Included on the software DVD, or you can also download hardware
and software technical publications from the March Networks Partner Portal.
Note: A Wall-Mounting Kit and / or a Tamper Proof Enclosure (to prevent unauthorized access to
the inside of the NVR) can be purchased separately if required.
WARNING: The procedures contained in this guide outline how to install or service components located
inside the unit, requiring the removal of the cover. Installation and maintenance procedures requiring
internal unit access are to be performed by qualified service personnel only.
When working inside the unit, ensure you take anti-static precautions.
Any attempt to service components of the recorder that are not considered field replaceable will
invalidate your warranty. The list of field serviceable parts includes:
Hard drives, caddies, and cables
Back-up batteries
Fans
Do not power up or operate the unit with the cover removed. The cover ensures the safe operation of the
unit. Operating the unit without the cover can expose you to live electric current and can cause the hard
drives to overheat.
ATTENTION : Les procédures contenues dans ce guide décrivent comment installer ou réparer les
composants situés à l'intérieur de l'unité, nécessitant le retrait du capot. Les procédures d'installation et
de maintenance nécessitant un accès interne à l'unité doivent être effectuées uniquement par du
personnel de maintenance qualifié.
Lorsque vous travaillez à l'intérieur de l'appareil, assurez-vous de prendre des précautions antistatiques.
Toute tentative de réparation de composants de l'enregistreur qui ne sont pas considérés comme
remplaçables sur site annulera votre garantie. La liste des pièces réparables sur site comprend:
Disques durs, caddies, et câbles
Batteries de sauvegarde
Ventilateurs
N'allumez pas et ne faites pas fonctionner l'appareil avec le couvercle retiré. Le couvercle garantit le
fonctionnement sûr de l'unité. Faire fonctionner l'appareil sans le couvercle peut vous exposer à un
courant électrique sous tension et entraîner une surchauffe des disques durs.
8704 S Hybrid NVR (Gen 2) Installation Guide
Feature Overview
11

Advertisement

Table of Contents
loading

Table of Contents