Kenwood DRV-A201 Instruction Manual page 16

1.
1.1
CONNECT THE DEVICE TO THE MAGNETIC MOUNT
Attach the device onto (e) the magnetic connector on the mount.
Make sure you align the device within the connector port for proper installation.
1.2 REPLACE THE SUCTION MOUNT WITH THE ADHESIVE MOUNT:
Suction Mount
There are two types of mounts included in the package. One is a suction-cup and
the other is an adhesive type. The suction mount makes it easier to attach and
detach from the windshield while the adhesive mount provides more solid support
for the camera.
The magnetic connector is already installed on the suction mount. If you prefer
using the adhesive mount, please follow the guide below:
(a) Suction release tab
(b) Locking lever
(c) Locking ring
(d) Power socket
(e) Magnetic Connector
13
Adhesive Mount