Huawei SUN2000-75KTL Series User Manual page 97

SUN2000-(75KTL, 100KTL, 110KTL, 125KTL) Series
User Manual
Figure 7-13 Grid parameters
Table 7-5 Grid parameters
Parameter
Grid Code
Isolation settings
Output mode
Automatically start upon grid
recovery
Grid connected recovery time
from grid faults (s)
Issue 11 (2021-11-10)
Description
Set this parameter based on the grid code of the country or
region where the inverter is used and the inverter application
scenario.
Set the working mode of the inverter based on the grounding
status at DC side and the connection to the power grid.
Specifies whether the inverter output has a neutral wire based
on the application scenario.
Specifies whether to allow the inverter to automatically start
after the power grid recovers.
Specifies the time after which the inverter begins restarting
after the power grid recovers.
Copyright © Huawei Technologies Co., Ltd.
7 Man-Machine Interactions
88