Huawei SUN2000-75KTL Series User Manual page 64

SUN2000-(75KTL, 100KTL, 110KTL, 125KTL) Series
User Manual
Figure 5-14 AC terminal block dimensions of a 3-pin model
Figure 5-15 AC terminal block dimensions of 4-pin models
This section describes how to install an AC output power cable for the 3-pin model.
Procedure
Step 1 Prepare a cable.
Step 2 Remove rubber rings according to the cable diameter range.
Step 3 Secure the AC output power cable and PE cable.
Step 4 Install the support bar.
Step 5 Close the maintenance compartment door and tighten the two screws on the
door.
Issue 11 (2021-11-10)
NO TE
Copyright © Huawei Technologies Co., Ltd.
5 Electrical Connections
55