Installing Lp Gas Tank; Installing Natural Gas Line; Operating Instructions - Backyard GBC1748WPFB-C Owner's Manual

Outdoor lp gas barbecue grill

Hide thumbs

Table of Contents

To operate, you will need one precision-filled standard grill LP gas tank with external valve threads .

W LP gas tank must be properly disconnected and

removed prior to moving this grill.

Inserting LP Gas Tank

Place precision-filled LP gas tank upright into the notches in the right cart frame so the tank

valve is facing the gas line connection .

Connecting LP Gas Tank

1 .

Before connecting, be sure there is no debris caught

in the head of the LP gas tank, head of the regulator

valve or in the head of the burner or burner ports .

2 .

Connect regulator/hose assembly to tank by turning

knob clockwise until it stops .

Getting More Propane

Need a tank of gas? One option is to try propane exchange . It's easy, fast, safe, and available

at tens of thousands of conveniently located retail outlets nationwide, which are typically

open nights and weekends . You can purchase a fresh, precision-filled tank or exchange your

empty for a fresh, precision-filled tank . Another option is to have your tank refilled at a refill

station . Be sure to check the hours of operation for the refill station .

Installation should be done by a qualified service person .

W CAUTION: If young children are in the area, a locking valve should be considered.

Connecting Natural Gas Line

1 .

Before connecting, be sure there is no debris caught in the head of the natural gas line, head of the grill natural gas line or in the head of the

burner or burner ports .

2 .

Connect grill natural gas line to natural main gas line .

Disconnecting Natural Gas Line

1 .

Before disconnecting, make sure the natural gas main line valve is "OFF ."

2 .

Disconnect grill natural gas line from natural gas main line .

Checking for Leaks

Burner Connections

1 .

Make sure the regulator hose and valve connections are securely fastened to the burner and the

tank .

2 .

Visually check the connection between the burner/venturi tube and orifice .

3 .

Make sure the burner/venturi tube fits over the orifice .

W WARNING: Failure to inspect this connection or follow these instructions

could cause a fire or an explosion which can cause death, serious bodily

injury or damage to property.

4 .

Please refer to diagram for proper installation (Figure 1 and 2) .

5 .

If the burner/venturi tube does not rest flush to the orifice, as shown, please contact

1 .800 .694 .0013 for assistance .

Tank/Gas Line Connection

1 .

Make 2-3 oz . of leak detection solution by mixing one part liquid dishwashing soap with three

parts water .

2 .

Make sure control knobs are in the " OFF" position (Figure 3) .

LP: Connect LP gas tank per "Installing LP Gas Tank" section .

NG: Connect NG main line per "Installing Natural Gas Line" section .

LP: Turn LP gas tank valve to "OPEN ."

NG: Turn "ON" natural gas main valve .

CAUTION

Installing Natural Gas Line