Philips HD9270/96 User Manual page 13

Tip
During cooking, if you want to change the cooking time or temperature, press
•
the corresponding up or down button at any time to do so.
To pause the cooking process, press the On/Off button. To resume the cooking
•
process, press the On/Off button again to continue the cooking process.
The device is automatically in pause mode when you pull out the pan and the
•
basket. The cooking process continues when the pan and the basket are put in
the appliance again.
To change the temperature unit from Celsius to Fahrenheit or the other way
•
around on your Airfryer, press the temperature up and down button at the
same time for about 10 seconds.
Note
If you do not set the required cooking time within 30 minutes, the appliance
•
automatically shuts off for safety reasons.
Some ingredients require shaking or turning halfway through the cooking time
•
(see 'Food table'). To shake the ingredients, pull out the pan with the basket,
place it on a heat resistant work top, slide the lid and press the basket release
button to remove the basket and shake the basket over the sink. Then put the
basket into the pan, and slide them back into the appliance.
If you set the timer to the half of the cooking time and you hear the timer bell
•
it is time to shake or turn the ingredients. Be sure to reset the timer to the
remaining cooking time.
9 When you hear the timer bell, the cooking time has elapsed.
Note
You can stop the cooking process manually. To do this, press the On/Off
•
button.
10 Pull out the pan and check if the ingredients are ready.
Caution
The Airfryer pan is hot after the cooking process. Always place it on a heat
•
resistant work top (eg. trivet, etc.) when you remove the pan from the device.
Note
If the ingredients are not ready yet, simply slide the pan back into the Airfryer
•
by the handle and add a few extra minutes to the set time.
ENGLISH 13