Philips HD9270/96 User Manual page 22

22 ENGLISH
Problem
White smoke comes
out of the appliance.
The screen on the
Airfryer shows "E1".
Possible cause
You are cooking fatty
ingredients.
The pan still contains greasy
residues from previous use.
Breading or coating did not
adhere properly to the food.
Marinade, liquid or meat
juices are splattering in the
rendered fat or grease.
The device is broken/defect.
Your Airfryer might be stored
in a place where it is too cold.
Solution
Carefully pour off any excess oil or fat from the
pan and then continue cooking.
White smoke is caused by greasy residues
heating up in the pan. Always clean the pan and
the basket thoroughly after every use.
Tiny pieces of airborne breading can cause
white smoke. Firmly press breading or coating to
food to ensure it sticks.
Pat food dry before placing it in the basket.
Call the Philips service hot line or contact the
Consumer Care Center in your country.
If your device was stored at a low ambient
temperature, let it warm up to room temperature
for at least 15 minutes before you plug it in again.
If your display still shows "E1", call the Philips
service hot line or contact the Consumer Care
Center in your country.