Behringer ULTRA-DI DI100 User Manual page 4

Hide thumbs Also See for ULTRA-DI DI100:

2.3 Converting a microphone from high impedance unbalanced to low impedance balanced

2.4 Tapping a signal from a power amplifier output

Always make sure the GROUND LIFT is on (no ground link) when connecting to speaker terminals. This

prevents accidental short-circuiting of the amplifier output. Also make sure the Tip of the input jack is

connected to the red terminal and that the metal housing of the DI100 has no contact with other equipment.

3. Specifications

4. Warranty

§ 1 WARRANTY CARD

§ 2 WARRANTY

§ 3 RETURN AUTHORIZATION NUMBER

BEHRINGER INTERNATIONAL GmbH

Service Department

Hanns-Martin-Schleyer-Str. 36-38

D - 47877 Willich-Münchheide

§ 4 WARRANTY REGULATIONS

All manuals and user guides at all-guides.com

Fig 2.3: Connection to an amplifier output

BEHRINGER is constantly striving to maintain the highest professional

standards. As a result of these efforts, modifications may be made from

time to time to existing products without prior notice. Specifications and

appearance may differ from those listed or shown.

§ 5 WARRANTY TRANSFERABILITY

§ 6 CLAIM FOR DAMAGES

§ 7 OTHER WARRANTY RIGHTS