Factory Reset - Eept - LG RN1329CD1P Owner's Manual

40
PROGRAMMING MODE

2. Factory reset - EEPt

After a factory reset, all values are reset to the default values.
Entering set up
mode.
You will see LqC1
NOTE
• Dryer default value for CARD/COIN machine
- Drying time
- Top off time
• Drying time in OPL machine can be changed from 1 to 100 Minutes by pressing the cycle button.
Press the Med Temp. or the Low Temp. Button until
appears in the display.
Press the Start button.
Press the Med Temp. button until
display.
Press the Start button, then factory reset is done.
45 Minute
15 Minute
Button
appears in the
Display